Hydraway products providing solutions for your wet basement problems.
Hydraway
The specially engineered design permits high inflow rates for rapid dewatering of the turf area while effectively preventing passage of soil particles. We specialize in drainage for: sports turf, athletic fields, golf courses, highways, and runways, as well as under pond liners as a vent and waterproofing for basements and crawlspaces.
The Hydraway Drainage System® is the fastest in the industry. It has a 80% inflow rate, which is 7 to 25 times higher than most other systems. It is capable of withstanding 11,000 lbs/ft2. The entire system is a superior performing and cost effective replacement for the “French” drain, or other conventional “drain-tile” systems.
HYDRAWAY DRAINAGE SYSTEM®
The Hydraway Drainage System has been used across the world in sports fields, natural turf, synthetic turf, golf courses, civil applications, roadways, landscaping, and residential waterproofing and drainage applications. Learn more on how Hydraway can benefit your next drainage project here.
HYDRAWAY® WATERPROOFING SYSTEM
The Hydraway Waterproofing System removes water 70% faster from basements than standard methods. Combined with its no-clog guarantee, this system is the best for keeping basements dry.
HYDRAPUMP®
Intech Anchoring offers the Hydrapump sump pump to complete the drainage system and pump water out of the interior of the home. The Hydrapump is the industry’s best performing sump pump on the market.
HYDRASHIELD®
The Hydrashield Wall Paneling system is a basement moisture barrier that can brighten up an unsightly basement adding a “finished” look to any basement, while ultimately protecting the interior from incoming moisture. With easy installation consisting of rigid panels and matching connectors, Intech Anchoring’s moisture barrier system is ideal for residential waterproofing contractors.
HYDRALINER®
Crawlspaces are prone to retaining moisture, bringing humidity levels to well over 50%. Combined with low lighting, they are ideal places for mold and other bacteria to thrive. Intech Anchoring provides the Hydraliner system to help prevent the possibility of these growths.
TESTIMONIALS
Engineers choose Hydraway due to its high compressive strengths, inflow rate, and guaranteed results. Read what some of the top drainage contractors in the country have to say about their experience with Hydraway.
Hydraway 2000® Physical Properties
| Product | Test Method | Typical Value |
| Compressive Strength | ASTM D-695/16211 | 11,400 PSF |
| Flow Rate At 1,500 PSF | ASTM D-471622 | 21 GPM/ft-width |
| Peel Strength3 | ASTM D-1876 | 50 lbs/ft-width |
| Fabric (4.5 oz.) | ||
| Elongation | ASTM D-4632-91 | 50% |
| Grab Tensile | ASTM D-4632-91 | 120 lbs |
| Puncture Strength | ASTM D-4833-00 | 65 lbs |
| Mullen Burst Strength | ASTM D-3756-87 | 225 psi |
| Trapezoidal Tear | ASTM D-4533-91 | 50 lbs |
| Wide width Tensile | ASTM D-4595 | 50 lbs/in |
| UV Resistance (500 hours) | ASTM D-4355-02 | 70% |
| Permitivity | ASTM D-4491-99A | 1.8 sec |
| Permeability | ASTM D-4751-99A4 | .21 cm/sec |
| Flow Rate | ASTM D-4491 | 135 gal/min/ft24 |
| AOS (EOS) | ASTM D-4751-99A | 70 US Standard Sieve |
| Roll Dimensions | |
| Width | 6, 12, 18, or 24 inches – Other sizes available upon request |
| Length | 150 feet – up to 550′ available upon request |
| Footnotes |
| 1. Modified – an existing ASTM test was modified since a recognized test method had not been established for this type of product at time of testing. |
| 2. Gradient of 0.1 |
| 3. Fabric to core |
| 4. Values shown are in weaker principal direction. Minimum average roll values are calculated as the typical minus two standard deviations. Statistically, it yields a 97.7% degree of confidence that any samples taken from quality assurance testing will exceed the value reported. |
Hydraway 300® Physical Properties
| Product | Test Method | Typical Value |
| Compressive Strength | ASTM D-695/16211 | 19,000 PSF |
| Flow Rate At 1,500 PSF | ASTM D-47162 | 27 GPM/ft-width |
| Peel Strength3 | ASTM D-1876 | 35 lbs/ft-width |
| Fabric (4.5 oz.) | ||
| Grab Tensile Strength | ASTM D-4632 | 120 lbs. |
| Grab Elongation | ASTM D-4632 | 50% |
| Puncture Strength | ASTM D-4833 | 65 lbs |
| Mullen Burst | ASTM D-3786 | 225 psi |
| Trapezoidal Tear | ASTM D-4533 | 50 lbs |
| Wide Width Tensile | ASTM D-4595 | 50 lbs/in |
| UV Resistance | ASTM D-4355 | 70% |
| Apparent Opening Size (AOS) | ASTM D-4751 | 70 US Standard Sieve |
| Permittivity | ASTM D-44914 | 1.8 sec |
| Permeability | ASTM D-44915 | 0.21 cm/sec |
| Water Flow Rate | ASTM D-4491 | 135 gal/min/ft2 |
Hydraway Drainage solutions
